HOME / PRODUCTS / CHANDELIERS / SHILO I MULTI-SPOKES CH115

 

Shilo I Multi-Spokes CH115 Chandelier

DIFFUSED GLASS CHANDELIER FOR BRIGHT AMBIENT & UPWARD ILLUMINATION

  • Choose 3, 5 or 6 spokes, for a unique custom look

  • Use more spokes for more light

  • Three diameter options:
    Small: approx. 31” diameter
    Medium: approx. 31” diameter
    Large: approx. 42” diameter

  • Cup-shaped SHILO I frosted-glass “heads” (approx. 4-1/2” diameter)

  • Also available with SHILO II frosted-glass heads

  • No transformer or driver necessary

  • Dimmable

SIZES

Diameter: imagining that the spokes (with their “heads”) fit within a circle, there are several approximate diameter options—

  • Small: approx. 20” diameter

  • Medium: approx. 26” diameter

  • Large: approx. 34” diameter

Glass Size: each Shilo I glass cup-like “head” is approximately—

  • Wide: 4-1/2”

  • Deep (front-to-back): 4-5/8”

  • High: 1-3/4”

Drop (the distance FROM face-of-ceiling TO bottom-of-fixture): standard drops are approximately 8-1/2”, 12-1/2”’, and 18-1/2” [Custom drops are available with an up-charge]


LIGHT SOURCES

In open top of fixture:
JCD Halogen lamp (one needed per Shilo “head”)
Base: Bi-pin, GY6.35
120 Volts
35, 50 or 75 Watts (each lamp)
No transformer necessary

In open top of fixture:
JD Halogen lamps (one needed per Shilo “head”)
Base: Bayonet, double-contact base, BA15d
130 Volts
50 or 75 Watts (each lamp)
No transformer necessary

In open top of fixture:
JD Krypton lamps (Blocks UV) (one needed per Shilo “head”)
Base: Bayonet, double-contact base, BA15d
120 Volts
20, 40, or 60 Watts (each lamp)
No transformer necessary

In open top of fixture:

LED lamps (Close to zero UV) (one per Shilo “head”)
Base: Bayonet, double-contact base, BA15d 
120 Volts - Dimmable 
6 Watts (each lamp) 75 Watt incandescent equivalent 
No transformer necessary

NOTE: Fixtures are provided with a set of lamps (or, if specified or integral to the fixture’s design, with LED’s), as specified by the customer. It is the customer’s responsibility to verify that their selection is compatible with their wiring, power, switching, and dimming system.


MOUNTING METHODS

  • MM01A (suspended by stems, and hardwired through a stem—with screws visible)

DRAWINGS AND FILES