Low-Voltage TP76
DIRECTIONAL ACCENT SPOT-LIGHT
Swivel allows for aiming at art or wall
A larger variety of finishes than almost any other system!
Match with our Track Element to create a unified system (see TE01)
Select the position of each Track Point “head”—and it will be neatly attached neatly in a fixed position on the Track
Track “head” can be mounted directly to the track -or- it can be “dropped” further down (on stems).
Front portion of lamp is exposed, allowing the lamp to become part of the fixture design
Transformer necessary
Dimmable
SIZES
Drop (the distance FROM face-of-ceiling TO bottom-of-fixture): Drop is the sum of three factors:
a. drop to bottom of Track Element
b. type of Lamp (because they vary in length)
c. length of stem, if any (connecting Lamp “head” to Track)
Total approximate drop dimension is finalized in shop drawing phase.
[Custom drops are available with an up-charge]
LIGHT SOURCES
Halogen lamp (one needed per “head”)
Base: Bayonet
PH20 (Philips “Halotone” Aluminum Reflector Lamp)
12Volts
20 Watts
Transformer necessary
Halogen lamp (one needed per “head”)
Base: Bi-pin
MR-16
12 Volts
50 Watts
Transformer necessary
Halogen lamp (one needed per “head”)
Base: GU-10
MR-11
12 Volts
35 Watts
Transformer necessary
Halogen lamp (one needed per “head”)
AR70
Base: Bayonet
12 Volts
20 or 50 Watts (each lamp)
Transformer necessary
NOTE: Fixtures are provided with a set of lamps (or, if specified or integral to the fixture’s design, with LED’s), as specified by the customer. It is the customer’s responsibility to verify that their selection is compatible with their wiring, power, switching, and dimming system.
MOUNTING METHODS
Track “heads” are mounted directly to the Track Element (see TE-1): they are FIXED-IN-PLACE.
Please provide a layout showing where you’d like each “head” to be located.
NOTE: after the heads are mounted (“fixed”) to the track, they cannot be moved to another location.
DRAWINGS AND FILES
