ACCENT LIGHTING
SL67
Bullets with 2 Swivels
CEILING OR SOFFIT-MOUNTED DIRECTIONAL SPOT-LIGHT
Directional Spot-Light
Two Swivels (one at each end of the stem)
More swivels give extra aiming flexibility
Various diameter “Bullet” shades are available:
Small Bullet: 2-3/8” diameter x 2-7/8” long
Medium Bullet: 2-3/8” diameter x 4-1/4” long
Large Bullet: 3-3/8” diameter x 4-1/2” long
[Note: size of bullet determines which bulbs can fit in the fixture—see LIGHT SOURCES for options]Available with Barrel swivel (allows adjustment of angle and direction) -or- Ball Swivel (allows adjustment of angle)
Transformer only necessary when a low voltage lamp is specified
Dimmable
SIZES
Drop (the distance FROM face-of-ceiling TO bottom-of-fixture): Drop is determined by two factors:
a. type of Bullet (because they vary in length)
b. length of stem (which connects the bullet to the plate)
Total drop is finalized in the shop drawing phase.
[Custom drops are available with an up-charge]
LIGHT SOURCES
NOTES: Not all lamps can be used for all Bullet sizes — See notes at each lamp to determine which lamps apply. The larger the bullet, the easier it is to change the lamp.
[THIS LAMP FOR USE WITH: Large and Medium Bullets]
LED lamp (one needed)
SORAA “Brilliant”’
Base: GU10
MR16
60 degree Flood
120 Volts
7.5 Watts
Color Temperature: 2700K
This LED lamp operates on line voltage, and NO separate driver or transformer is needed!
[THIS LAMP FOR USE WITH: Large and Medium Bullets]
LED lamp (one needed)
SORAA “Brilliant”’
Base: Bi-pin
MR16
60 degree Flood
120 Volts
7.5 Watts
Color Temperature: 2700K
This LED lamp operates on line voltage, and NO separate driver or transformer is needed!
[THIS LAMP FOR USE WITH: Large and Medium Bullets]
Halogen lamp (one needed)
Base: GU10
MR-16
Flood
120 Volts
50 Watts
No transformer necessary
[THIS LAMP FOR USE WITH: Large, and Medium Bullets]
Halogen lamp (one needed)
Base: Bi-pin
MR-16
Flood
120 Volts
50 Watts
No transformer necessary
[THIS LAMP FOR USE WITH: Large, Medium, and Small Bullets]
Halogen lamp (one needed)
Base: GU-10
MR-11
Flood
120 Volts
20 Watts
No transformer necessary
[THIS LAMP FOR USE WITH: Large, Medium, and Small Bullets]
Halogen lamp (one needed)
JCD
Base: Bi-pin, GY6.35
120 Volts
20, 35, 50 or 75 Watts (each lamp)
No transformer necessary
[THIS LAMP FOR USE WITH: Large, Medium, and Small Bullets]
Halogen lamp (one needed)
JD
Base: Bayonet, double-contact base, BA15d
130 Volts
50 or 75 Watts (each lamp)
No transformer necessary
[THIS LAMP FOR USE WITH: Large, Medium, and Small Bullets]
Krypton lamp (one needed)
JD
Base: Bayonet, double-contact base, BA15d
120 Volts
40 or 60 Watts (each lamp)
No transformer necessary
[THIS LAMP FOR USE WITH: Large, Medium, and Small Bullets]
Halogen lamp (one needed)
Base: Bayonet
PH20 (Philips “Halotone” Aluminum Reflector Lamp)
12Volts
20 Watts
Transformer necessary
[THIS LAMP FOR USE WITH: Large, Medium, and Small Bullets]
Halogen lamp (one needed)
Base: Bi-pin
MR-8
Narrow Beam
12Volts
35 Watts
Transformer necessary
NOTE: Fixtures are provided with a set of lamps (or, if specified or integral to the fixture’s design, with LED’s), as specified by the customer. It is the customer’s responsibility to verify that their selection is compatible with their wiring, power, switching, and dimming system.
MOUNTING METHODS
MM01A (suspended on a stem, and hardwired through stem—with screws visible)
DRAWINGS AND FILES
