Guten Swivel SL72
CEILING OR SOFFIT-MOUNTED DIRECTIONAL SPOT-LIGHT
Directional Spot-Light
Swivel allows for aiming at art or wall
Also available without Guten bullet (lamp is mainly exposed, allowing the lamp to be part of the fixture design)
Available with Barrel swivel (allows adjustment of angle and direction) -or- Ball Swivel (allows adjustment of angle)
No transformer necessary
Dimmable
SIZES
Width: bullet is approximately 2-3/4” diameter [The width of the plate will depend on the plate that is specified.]
Drop (the distance FROM face-of-wall TO bottom-of-fixture): drops will depend on which stem is used. [Custom drops are available with an up-charge]
LIGHT SOURCES
LED lamp (one needed)
SORAA “Brilliant”’
GU10 socket
MR16
60 degree
120 Volts
7.5 Watts
Color Temperature: 2700K
This LED lamp operates on line voltage, and NO separate driver or transformer is needed!
LED lam (one needed)
SORAA “Brilliant”’
Base: Bi-pin
MR16
60 degree Flood
120 Volts
7.5 Watts
Color Temperature: 2700K
This LED lamp operates on line voltage, and NO separate driver or transformer is needed!
Halogen lamp (one needed)
Base: GU10
MR-16
Flood
120 Volts
50 Watts
No transformer necessary
Halogen lamp (one needed)
Base: Bi-pin
MR-16
Flood
120 Volts
50 Watts
No transformer necessary
Halogen lamp (one needed)
Base: GU-10
MR-11
Flood
120 Volts
20 Watts
No transformer necessary
Halogen lamp (one needed)
JCD
Base: Bi-pin, GY6.35
120 Volts
20, 35, 50 or 75 Watts (each lamp)
No transformer necessary
NOTE: Fixtures are provided with a set of lamps (or, if specified or integral to the fixture’s design, with LED’s), as specified by the customer. It is the customer’s responsibility to verify that their selection is compatible with their wiring, power, switching, and dimming system.
MOUNTING METHODS
MM01A (suspended on a stem, and hardwired through stem—with screws visible)
MM01B (suspended on a stem, and hardwired through stem—with No screws visible) – the most typically specified mounting
DRAWINGS AND FILES
