HOME / PRODUCTS / ART LIGHTS / LUXLINE AL04

AL04_Luxline_art_light_custom_picture_lights_modern_lighting_long.jpg

ART LIGHTS

ALO4

Luxline

Luxline = “Modernist Rectangle” extrusion shape [Consider using our AL03 HRL fixture, when glare might be a concern]

  • Not for use over mirrors — Instead, see our Vanity Light VL11

  • Any length

  • No transformer or driver necessary

  • Dimmable

  • ETL Approved to meet UL Standards

  • Stem locations based on length of fixture.

  • 10" stems are typical but projections are based on application (lighting tall art pieces, lighting cabinetry.)

  • Greater protrusion = greater light quality

SIZES

Length: Please specify in units-of-an-inch [Note: lengths over 12 feet will require a discrete seam]

Protrusion:

  • Standard protrusions are 6”, 10” and 16” stems.

  • Custom protrusions: are available with an up-charge (with all mountings, except MM02)

LIGHT SOURCES

LED lamps (Close to zero UV)

  • 6 Watts 75 Watt incandescent equivalent 900 lumens (each lamp)

  • Color Temperature: 2700K -or- 3000K 80+ CRI

  • Base: Bayonet, double-contact base, BA15d

  • 120 Volts - Dimmable ETL Approved

  • Note: Lamps are usually spaced approximately 12” apart

  • These LED’s operate on line voltage, and NO separate driver or transformer is needed.

JD Krypton lamps (Blocks UV)

  • 20, 40, or 60 Watts (each lamp)

  • Base: Bayonet, double-contact base, BA15d

  • 120 Volts

  • Note: Lamps are usually spaced approximately 12” apart

JD Halogen lamps

  • 50 or 75 Watts (each lamp)

  • Base: Bayonet, double-contact base, BA15d

  • 130 Volts

  • Note: Lamps are usually spaced approximately 12” apart

NOTE: Fixtures are provided with a set of lamps (or, if specified or integral to the fixture’s design, with LED’s), as specified by the customer. It is the customer’s responsibility to verify that their selection is compatible with their wiring, power, switching, and dimming system.


MOUNTING METHODS

  • MM01A (hardwired, with screws visible)

  • MM01B (hardwired, with No screws visible) – the most typically specified mounting

  • MM02 (on wall-mounted arm(s), plugged into outlet)

  • MM03A (through a millwork fascia, hardwired)

  • MM03B (through a millwork fascia, plugged in)

  • MM04A (over or under a fixed shelf, with multiple stems)

  • MM04B (over or under a fixed shelf, with a single stem)

 


DRAWINGS AND FILES