Low Voltage PT75
CEILING OR SOFFIT-MOUNTED DIRECTIONAL SPOT-LIGHT
No enclosing “bullet”—the lamp itself becomes part of the design of the fixture
[No angular adjustment—But if you’d like a similar fixture with swivels for angular adjustment, see our Spot Fixture SL76]
Transformer needed
Dimmable
SIZES
Width: will depend on the diameter of the bulb that is specified [The diameter of the plate will depend on the plate that is specified.]
Drop (the distance FROM face-of-ceiling TO bottom-of-fixture): will depend on the size of the bulb that is specified. Thus, approximations can only be given for standard drops: approx. 6”, 10”, 14”, and 20” [Custom drops are available with an up-charge]
LIGHT SOURCES
Halogen lamp (one needed)
AR70
Base: Bayonet, Double-Contact
MR-16
12 Volts
50 Watts
Transformer necessary
Halogen lamp (one needed)
Base: Bi-Pin
MR-11
12 Volts
35 Watts
Transformer necessary
Halogen lamp (one needed)
Base: Bi-Pin
MR-16
12 Volts
50 Watts
Transformer necessary
Halogen lamp (one needed)
Base: Bayonet, Double-Contact
PH20 (Philips “Halotone” Aluminum Reflector Lamp)
12Volts
20 Watts
Transformer necessary
NOTE: Fixtures are provided with a set of lamps (or, if specified or integral to the fixture’s design, with LED’s), as specified by the customer. It is the customer’s responsibility to verify that their selection is compatible with their wiring, power, switching, and dimming system.
MOUNTING METHODS
MM01A (suspended on a stem, and hardwired through stem—with screws visible)
MM01B (suspended on a stem, and hardwired through stem—with No screws visible) – the most typically specified mounting
DRAWINGS AND FILES
