Wall Washers WW03

Minilux HRL

Print Specs Request a Quote
Wall Washers - Minilux HRL - 1 Wall Washers - Minilux HRL - 2 Wall Washers - Minilux HRL - 3 Wall Washers - Minilux HRL - 4 Wall Washers - Minilux HRL - 5 Wall Washers - Minilux HRL - 6 Wall Washers - Minilux HRL - 7 Wall Washers - Minilux HRL - 8

Description

Our BEST SELLER — this fixture’s front lip helps reduce the likelihood of glare from the underside of the fixture

  • Ceiling -or- Soffit-mounted
  • Linear Pendant Down-Light
  • Minilux HRL = “Half Round with a Lip” extrusion shape [The front Lip helps reduce the possibility of glare]
  • Any length
  • No transformer or driver necessary
  • Dimmable
  • ETL Approved to meet UL Standards

Finishes

  • White
  • Black
  • Brushed Chrome
  • Polished Chrome
  • Brushed Nickel
  • Polished Nickel
  • Bronze Powder Coat "Flat"
  • Brushed Golden Brass
  • Polished Golden Brass
Click here for more details on available finishes.

Sizes

Length: almost any length—Please specify in units-of-an-inch [Note: lengths over 12 feet will require a discrete seam]

Drop (the distance FROM face-of-ceiling TO bottom-of-fixture):

  • Standard Drops: are approximately 3”, 5”, 8”, 12” -or- 18”
  • Custom Drops: are available with an up-charge

NOTE: All dimensions are approximate.

Light Sources

LED boards (Close to zero UV)
120 Volts
Color Temperature: 2700K -or- 3000K
Approx. 13 Watts per linear foot
These LED’s operate on line voltage, and NO separate driver or transformer is needed!

JD Halogen lamps
Base: Bayonet, double-contact base, BA15d
130 Volts
50 or 75 Watts (each lamp)
No transformer necessary
Note: Lamps are usually spaced approximately 12” apart

JD Krypton lamps (Blocks UV)
Base: Bayonet, double-contact base, BA15d
120 Volts
20, 40, or 60 Watts (each lamp)
No transformer necessary
Note: Lamps are usually spaced approximately 12” apart

LED lamps (Close to zero UV)
Base: Bayonet, double-contact base, BA15d
120 Volts - Dimmable 
5 Watts (each lamp) 60 Watt incandescent equivalent 
No transformer necessary
Note: Lamps are usually spaced approximately 12” apart

NOTE: Fixtures are provided with a set of lamps (or, if specified or integral to the fixture’s design, LED’s), as specified by the customer. It is the customer’s responsibility to verify that their selection is compatible with their wiring, power, switching, and dimming system.

Mounting Methods

  • MM01A (hardwired, with screws visible)
  • MM01B (hardwired, with No screws visible) – the most typically specified mounting

NOTE: Fixtures will be provided for installation with normal mounting conditions. It is the customer’s responsibility to verify that they have selected a fixture and mounting method which complies with local codes (L.A.H.J.) and that they are installing the fixture in an approved manner.

Specify to Order

TO ORDER— PLEASE SPECIFY EACH OF THE FOLLOWING:

We’ll be happy to help you with these specifications!

  • Finish
  • Length: any length—Please specify in units-of-an-inch [Note: lengths over 12 feet will require a discrete seam]
  • Drop (the distance FROM face-of-ceiling TO bottom-of-fixture): standard drops are approximately 3”, 5”, 8”, 12” and 18” [Note: custom drops are available with an up-charge]
  • Mounting Method
  • Shape of the mounting plate: Square, Round, Rectangular-parallel to fixture, or Rectangular-perpendicular to fixture
  • LED’s -or- Incandescent Lamps?
  • If with LED’s: color temperature (approx. 2700K -or- approx. 3000K)
  • If with Incandescent Lamps: Halogen or Krypton?
  • If with Halogen Lamps: 50 or 75 watts (each lamp)
  • If with Krypton Lamps: 20, 40 or 60 watts (each lamp)