Linear Pendants LP153

Minilux HR Patera

Print Specs Request a Quote
Linear Pendants - Minilux HR Patera - 1 Linear Pendants - Minilux HR Patera - 2 Linear Pendants - Minilux HR Patera - 3

Description

Ceiling -or- Soffit-mounted

  • Linear Pendant, diffused light
  • Minilux HR—approximately “Half Round” extrusion shape
  • Any length
  • Any number of curved, frosted-glass Patera “heads” (each is approx. 8” square)
  • No transformer or driver necessary
  • Dimmable
  • ETL Approved to meet UL Standards

Finishes

  • White
  • Black
  • Brushed Chrome
  • Polished Chrome
  • Brushed Nickel
  • Polished Nickel
  • Bronze Powder Coat "Flat"
  • Brushed Golden Brass
  • Polished Golden Brass
Click here for more details on available finishes.

Sizes

Patera Glass: approximately 8” x 8-1/2” (the short dimension is parallel to the linear extrusion)

Length: almost any length—Please specify in units-of-an-inch [Note: lengths over 12 feet will require a discrete seam]

Drop (the distance FROM face-of-ceiling TO bottom-of-fixture):

  • Standard Drops: are approximately 14-1/4” or 20-1/4”
  • Custom Drops: are available with an up-charge
  • Minimum and Maximum Drops: If a drop is too short, one will see strong “hot spots” on the ceiling—and 14” is the approximate minimum drop to avoid that. BUT: if the drop is too large, the distance might cause an insufficient amount of light to bounce off the ceiling. When a large drop is wanted, then approximately 20” seems to work, but that can be extended to about 24” (Though designers sometimes specify drops which are larger than that.)
  • Adjustable Drops: We can provide this fixture with components that allow for field-trimming.

NOTE: All dimensions are approximate.

Light Sources

JD Halogen lamps (one per glass “head”)
Base: Bayonet, double-contact base, BA15d
120 Volts
20, 35, or 50 Watts (each lamp)
No transformer necessary

JD Krypton lamps (Blocks UV) (one per glass “head”)
Base: Bayonet, double-contact base, BA15d
120 Volts
20, 40 or 60 Watts (each lamp)
No transformer necessary

LED lamps may be available — Check with us for availability.

NOTE: Fixtures are provided with a set of lamps (or, if specified or integral to the fixture’s design, with LED’s), as specified by the customer. It is the customer’s responsibility to verify that their selection is compatible with their wiring, power, switching, and dimming system.

Mounting Methods

  • MM01A (suspended by stems, and hardwired through a stem—with screws visible)
  • MM01B (suspended by stems, and hardwired through a stem—with No screws visible) – the most typically specified mounting

NOTE: Fixtures will be provided for installation with normal mounting conditions. It is the customer’s responsibility to verify that they have selected a fixture and mounting method which complies with local codes (L.A.H.J.) and that they are installing the fixture in an approved manner.

Specify to Order

TO ORDER— PLEASE SPECIFY EACH OF THE FOLLOWING:

We’ll be happy to help you with these specifications!

  • Finish
  • Length — tip-to-tip of the extrusion (specified in units of an inch) Note: lengths over 12 feet will require a discrete seam
  • Number of curved frosted-glass PATERA “heads”
  • Drop (the approximate distance FROM face-of-ceiling-or-soffit TO bottom-of-fixture). Frequently used drops are approximately 14” or 20”
  • Mounting method
  • Shape of the mounting plate: Square, Round, Rectangular-parallel to fixture, or Rectangular-perpendicular to fixture
  • Lamp type: Halogen -or- Krypton lamps?
  • If with Halogen Lamps: 50 or 75 watts (each lamp)
  • If with Krypton Lamps: 20, 40 or 60 watts (each lamp)