Chandeliers CH 60

Trellis

Print Specs Request a Quote
Chandeliers - Trellis - 1 Chandeliers - Trellis - 2 Chandeliers - Trellis - 3 Chandeliers - Trellis - 4 Chandeliers - Trellis - 5

Description

A best-seller! — and ideal for customization to your size needs.

  • Diffuse light chandelier—with a “linear” quality
  • Excellent for low ceiling heights—“drop” can be as little as 6”
  • Size & Proportion and drop are adjustable—and can be almost any dimension
  • For a double-layer version: see our Chandelier CH70
  • Transformer is necessary
  • Dimmable

Finishes

  • Polished Chrome
  • Polished Nickel
  • Inquire for other finishes
Click here for more details on available finishes.

Sizes

Length & Width: Sides of the overall rectangle or square (that the fixture would fit into) can be of almost any size—please specify in units-of-an-inch

Drop (the distance FROM face-of-ceiling TO bottom-of-fixture):

  • Minimum Drop: approximately 6”
  • Custom Drop: please specify in units-of-an-inch

NOTE: All dimensions are approximate.

Light Sources

JC Xenon lamps (two lamps needed for each arm)
Base: Bi-Pin, G4
12 Volts
5 or 10 Watts (each lamp)
Transformer is necessary

NOTE: Fixtures are provided with a set of lamps (or, if specified or integral to the fixture’s design, with LED’s), as specified by the customer. It is the customer’s responsibility to verify that their selection is compatible with their wiring, power, switching, and dimming system.

Mounting Methods

  • MM01C (suspended by rods, and hardwired at 4-1/2" x 4-1/2" square plate, with "Modern Cap" screw visible at center of the plate)

NOTE: Fixtures will be provided for installation with normal mounting conditions. It is the customer’s responsibility to verify that they have selected a fixture and mounting method which complies with local codes (L.A.H.J.) and that they are installing the fixture in an approved manner.

Specify to Order

TO ORDER— PLEASE SPECIFY EACH OF THE FOLLOWING:

We’ll be happy to help you with these specifications!

  • Finish
  • Overall Length & Width (specified in units-of-an-inch)
  • Number of Arms (with bulbs at both ends of each arm). They’re usually spaced approximately 5” -to- 10” apart. [We can help work that out for you, and we’ll determine final dimensions in shop drawing phase.]
  • Drop (the approximate distance FROM face-of-ceiling-or-soffit TO bottom-of-horizontal Arms).
  • Lamps: wattage (of each lamp)