Chandeliers CH30

Galaxy

Print Specs Request a Quote
Chandeliers - Galaxy - 1 Chandeliers - Galaxy - 2 Chandeliers - Galaxy - 3 Chandeliers - Galaxy - 4 Chandeliers - Galaxy - 5 Chandeliers - Galaxy - 6 Chandeliers - Galaxy - 7 Chandeliers - Galaxy - 8

Description

A whimsical modern Chandelier, not a “rigid” design!—yet one that gives usable light

  • Each angled Arm has bulbs at both ends: they’re typically 36” long, but be specified from 24” to 48” long
  • Fixture is composed of groups of 4 angled Arms — And the fixture can be done with several such groupings (for a total of 4 Arms -or- 8 Arms -or- 16 Arms)
  • Angle of the Arms is field-adjustable
  • Minimum drop is approximately 24”—but longer drops, of almost any length, are possible
  • Transformer is necessary
  • Dimmable
  • ETL Approved to meet UL Standards

Finishes

  • Polished Chrome
  • Polished Nickel
Click here for more details on available finishes.

Sizes

Width: will depend on two factors—

  • Length of each arm
  • Angle or each arm
  • Please specify desired size in units-of-an-inch.
  • Final size is approximated in shop drawings.

Drop (the distance FROM face-of-ceiling TO bottom-of-fixture): will depend on five factors—

  • Length of each arm
  • Angle or each arm
  • Groupings of arms (four arms in each group)— groups can be stacked one, two, or three-high
  • Closeness of the groups— groups can be overlapped –or- spaced-apart
  • Suspension rod length which can be customized
  • Please specify desired size in units-of-an-inch.
  • Final size is approximated in shop drawings.

NOTE: All dimensions are approximate.

Light Sources

JC Xenon lamps (two lamps needed for each arm)
Base: Bi-Pin, G4
12 Volts
5 or 10 Watts (each lamp)
Transformer necessary

NOTE: Fixtures are provided with a set of lamps (or, if specified or integral to the fixture’s design, with LED’s), as specified by the customer. It is the customer’s responsibility to verify that their selection is compatible with their wiring, power, switching, and dimming system.

Mounting Methods

  • MM01C (suspended by rods, and hardwired at ceiling behind a 6-1/2” round-domed plate; with a "Modern Cap" screw visible at center of the plate)

NOTE: Fixtures will be provided for installation with normal mounting conditions. It is the customer’s responsibility to verify that they have selected a fixture and mounting method which complies with local codes (L.A.H.J.) and that they are installing the fixture in an approved manner.

Specify to Order

TO ORDER— PLEASE SPECIFY EACH OF THE FOLLOWING:

We’ll be happy to help you with these specifications!

  • Finish
  • Number of angled Arm Groups (each group has a set of 4 arms): one group (4 arms) -or-two groups (8 arms) -or- three groups (16 arms)
  • Width of arms
  • Drop (the approximate distance FROM face-of-ceiling TO bottom-of-fixture).
  • Lamps: wattage (of each lamp)