Description
Designed by PAUL RUDOLPH - Up-Light chandelier
- Minilux HR—approximately “Half Round” extrusion shape
- Dimensions & proportions are adjustable: this fixture’s lengths & widths can range from 22” to 72”
- Also available with “Down” openings for the lights (when specified with bulbs)
- No transformer or driver necessary
- Dimmable
- ETL Approved to meet UL Standards
Finishes
- White
- Black
- Brushed Chrome
- Polished Chrome
- Brushed Nickel
- Polished Nickel
- Bronze Powder Coat "Flat"
- Brushed Golden Brass
- Polished Golden Brass
Sizes
Length & Width: approximately 34”—but custom sizes are available (please inquire)
Drop (the distance FROM face-of-ceiling TO bottom-of-fixture):
- Standard Drops: are approximately 20”
- Custom Drops: are available with an up-charge
- Minimum and Maximum Drops: If a drop is too short, one will see “hot spots” on the ceiling—and 20” is the approximate minimum drop to avoid that. BUT: if the drop is too large, the distance might cause an insufficient amount of light to bounce off the ceiling. When an average good drop is wanted, then approximately 20” seems to be best, and that can be extended.
- Adjustable Drops: Some mounting methods allow for field adjustment of the size of the drop, like the methods where the fixture is held-up by Cables (which can be field-trimmed), or when we provide Custom Drops (whose components allow for field-trimming).
NOTE: All dimensions are approximate.
Light Sources
LED boards (Close to zero UV)
14 Watts 1200 Lumens (per foot diffused optic)
Color Temperature: 2700K -or- 3000K 95 CRI
120 Volts Dimmable ETL Approved
These LED’s operate on line voltage, and NO separate driver or transformer is needed!
LED lamps (Close to zero UV)
5 Watts 60 Watt incandescent equivalent 700 lumens (each lamp)
6 Watts 75 Watt incandescent equivalent 900 lumens (each lamp)
Color Temperature: 2700K -or- 3000K 80+ CRI
Base: Bayonet, double-contact base, BA15d
120 Volts - Dimmable ETL Approved
Note: Lamps are usually spaced approximately 12” apart
These LED’s operate on line voltage, and NO separate driver or transformer is needed!
JD Krypton lamps (Blocks UV)
20, 40, or 60 Watts (each lamp)
Base: Bayonet, double-contact base, BA15d
120 Volts
Note: Lamps are usually spaced approximately 12” apart
JD Halogen lamps
50 or 75 Watts (each lamp)
Base: Bayonet, double-contact base, BA15d
130 Volts
Note: Lamps are usually spaced approximately 12” apart
NOTE: Fixtures are provided with a set of lamps (or, if specified or integral to the fixture’s design, with LED’s), as specified by the customer. It is the customer’s responsibility to verify that their selection is compatible with their wiring, power, switching, and dimming system.
Mounting Methods
- MM01A (suspended by stems, and hardwired through a stem—with screws visible)
NOTE: Fixtures will be provided for installation with normal mounting conditions. It is the customer’s responsibility to verify that they have selected a fixture and mounting method which complies with local codes (L.A.H.J.) and that they are installing the fixture in an approved manner.
Specify to Order
TO ORDER— PLEASE SPECIFY EACH OF THE FOLLOWING:
We’ll be happy to help you with these specifications!
- Finish
- Length of Upper layer (specified in units of an inch)
- Length of Lower layer (specified in units of an inch)
- Drop (the approximate distance FROM face-of-ceiling-or-soffit TO bottom-of-fixture). [The drop should be a minimum of 21” for good lighting quality—and larger drops can give even better light quality.]
- Mounting method
- Shape of the mounting plate: square or round Flat plate
- LED’s -or- Bulbs?
- If with LED’s: color temperature (approx. 2700K -or- approx. 3000K)
- If with Bulbs: bulb Type (Halogen or Krypton) & Wattage of each bulb
- Down Openings? (only available when using incandescent lamps)
- Down Openings: quantity
- Down Opening: locations