Chandeliers CH07

Quadron

Print Specs Request a Quote
Chandeliers - Quadron - 1 Chandeliers - Quadron - 2 Chandeliers - Quadron - 3 Chandeliers - Quadron - 4 Chandeliers - Quadron - 5 Chandeliers - Quadron - 6 Chandeliers - Quadron - 7 Chandeliers - Quadron - 8

Description

Designed by PAUL RUDOLPH - Up-Light chandelier

  • Minilux SQ—approximately “SQuare” extrusion shape
  • Dimensions & proportions are adjustable: this fixture can be almost any length & width – and creative variations on this classic design can help solve problems in many settings.
  • Also available with “Down” openings for the lights (when specified with bulbs)
  • No transformer or driver necessary
  • Dimmable
  • ETL Approved to meet UL Standards

Finishes

  • White
  • Black
  • Brushed Chrome
  • Polished Chrome
  • Brushed Nickel
  • Polished Nickel
  • Bronze Powder Coat "Flat"
  • Brushed Golden Brass
  • Polished Golden Brass
Click here for more details on available finishes.

Sizes

Length & Width: can be of almost any size—please specify in units-of-an-inch (minimum length of a segment is 18”)
Note: lengths over 12 feet will require a discrete seam

Drop (the distance FROM face-of-ceiling TO bottom-of-fixture):

  • Standard Drops: are approximately 12” or- approximately 18”
  • Custom Drops: are available with an up-charge
  • Minimum and Maximum Drops: If a drop is too short, one will see “hot spots” on the ceiling—and 11” is the approximate minimum drop to avoid that. BUT: if the drop is too large, the distance might cause an insufficient amount of light to bounce off the ceiling. When an average good drop is wanted, then approximately 18” seems to be best, and that can be extended to about 24” (Though designers sometimes specify drops which are larger than that.)
  • Adjustable Drops: Some mounting methods allow for field adjustment of the size of the drop, like the methods where the fixture is held-up by Cables (which can be field-trimmed), or when we provide Custom Drops (whose components allow for field-trimming).

NOTE: All dimensions are approximate.

Light Sources

LED boards(Close to zero UV)
120 Volts
Color Temperature: 2700K -or- 3000K
Approx. 13 Watts per linear foot
These LED’s operate on line voltage, and NO separate driver or transformer is needed!

JD Halogen lamps
Base: Bayonet, double-contact base, BA15d
130 Volts
50 or 75 Watts (each lamp)
No transformer necessary
Note: Lamps are usually spaced approximately 12” apart

JD Krypton lamps (Blocks UV)
Base: Bayonet, double-contact base, BA15d
120 Volts
40 or 60 Watts (each lamp)
No transformer necessary
Note: Lamps are usually spaced approximately 12” apart

LED lamps - (Close to zero UV)

Base: Bayonet, double-contact base, BA15d
130 Volts
5 Watts (each lamp - 50 Watt equivalent in Halogen)
No transformer necessary
Note: Lamps are usually spaced approximately 12” apart

NOTE: Fixtures are provided with a set of lamps (or, if specified or integral to the fixture’s design, with LED’s), as specified by the customer. It is the customer’s responsibility to verify that their selection is compatible with their wiring, power, switching, and dimming system.

Mounting Methods

  • MM01A (suspended by stems, and hardwired through a stem—with screws visible)
  • MM01B (suspended by stems, and hardwired through a stem—with No screws visible) – the most typically specified mounting
  • MM08A (suspended by slender cables, and hardwired through a power cable)
  • MM08B (suspended by slender cables, and hardwired through a stem)
  • MM08C (suspended by stems, and hardwired through a power cable)

NOTE: Fixtures will be provided for installation with normal mounting conditions. It is the customer’s responsibility to verify that they have selected a fixture and mounting method which complies with local codes (L.A.H.J.) and that they are installing the fixture in an approved manner.v

Specify to Order

TO ORDER— PLEASE SPECIFY EACH OF THE FOLLOWING:

We’ll be happy to help you with these specifications!

  • Finish
  • Overall Length & Width (specified in units of an inch)
  • Drop (the approximate distance FROM face-of-ceiling-or-soffit TO bottom-of-fixture). A frequently used drop is approximately 18” [The drop should be a minimum of 12” for good lighting quality—and larger drops (up to 24”) can give even better light quality.]
  • Mounting method
  • Shape of the mounting plates: square or round
  • LED’s -or- Incandescent Lamps?
  • If with LED’s: color temperature (approx. 2700K -or- approx. 3000K)
  • If with Incandescent Lamps: Halogen -or- Krypton?
  • If with Halogen Lamps: 50 or 75 watts (each lamp)
  • If with Krypton Lamps: 20, 40 or 60 watts (each lamp)
  • Down Openings? (only available when using incandescent lamps)
  • Down Openings: quantity
  • Down Opening: locations