Chandeliers CH04

Trianon

Print Specs Request a Quote
Chandeliers - Trianon - 1 Chandeliers - Trianon - 2 Chandeliers - Trianon - 3 Chandeliers - Trianon - 4 Chandeliers - Trianon - 5 Chandeliers - Trianon - 6

Description

Designed by PAUL RUDOLPH - Rectangular -or- Square, Up-Light chandelier

  • Custom angles are available (to make a diamond, parallelogram, or trapezoid shape)
  • Luxline = “Modernist Rectangle” extrusion shape
  • Sides can be any length
  • Multi-Tier -or- Single-Tier versions available: specify with 1, 2, or 3 tiers
  • No transformer or driver necessary
  • Dimmable
  • ETL Approved to meet UL Standards

Finishes

  • White
  • Polished Chrome
Click here for more details on available finishes.

Sizes

Length & Width: Sides of each rectangle or square can be of almost any length—please specify in units-of-an-inch (minimum length of a side is 12”)
Note: lengths over 12 feet will require a discrete seam

Drop (the distance FROM face-of-ceiling TO bottom-of-fixture):

  • Standard Drops (to bottom of top-most tier): are approximately 12” or- approximately 18”
  • Custom Drops: are available with an up-charge
  • Minimum and Maximum Drops: If a drop is too short, one will see “hot spots” on the ceiling—and 11” is the approximate minimum drop to avoid that. BUT: if the drop is too large, the distance might cause an insufficient amount of light to bounce off the ceiling. When an average good drop is wanted, then approximately 18” seems to be best, and that can be extended to about 24” (Though designers sometimes specify drops which are larger than that.)
  • Adjustable Drops: Some mounting methods allow for field adjustment of the size of the drop, like the methods where the fixture is held-up by Cables (which can be field-trimmed), or when we provide Custom Drops (whose components allow for field-trimming).

NOTE: All dimensions are approximate.

Light Sources

JD Halogen lamps
Base: Bayonet, double-contact base, BA15d
130 Volts
50 or 75 Watts (each lamp)
No transformer necessary
Note: Lamps are usually spaced approximately 12” apart

JD Krypton lamps (Blocks UV)
Base: Bayonet, double-contact base, BA15d
120 Volts
20, 40 or 60 Watts (each lamp)
No transformer necessary
Note: Lamps are usually spaced approximately 12” apart

LED lamps (Close to zero UV)
Base: Bayonet, double-contact base, BA15d
120 Volts - Dimmable 
5 Watts (each lamp) 60 Watt incandescent equivalent 
No transformer necessary
Note: Lamps are usually spaced approximately 12” apart

NOTE: Fixtures are provided with a set of lamps (or, if specified or integral to the fixture’s design, with LED’s), as specified by the customer. It is the customer’s responsibility to verify that their selection is compatible with their wiring, power, switching, and dimming system.

Mounting Methods

  • MM01A (suspended by stems, and hardwired through a stem—with screws visible)
  • MM01B (suspended by stems, and hardwired through a stem—with No screws visible) – the most typically specified mounting
  • MM08A (suspended by slender cables, and hardwired through a power cable)
  • MM08B (suspended by slender cables, and hardwired through a stem)
  • MM08C (suspended by stems, and hardwired through a power cable)

NOTE: Fixtures will be provided for installation with normal mounting conditions. It is the customer’s responsibility to verify that they have selected a fixture and mounting method which complies with local codes (L.A.H.J.) and that they are installing the fixture in an approved manner.

Specify to Order

TO ORDER— PLEASE SPECIFY EACH OF THE FOLLOWING:

We’ll be happy to help you with these specifications!

  • Finish
  • Number of Tiers (1, 2, or 3)
  • Length of each Side (specified in units of an inch) When there are multiple tiers: specify the sides of the largest (topmost) tier. Note: lengths over 12 feet will require a discrete seam
  • If not a rectangle or square: angles at each corner (please provide a sketch)
  • Drop (the approximate distance FROM face-of-ceiling-or-soffit TO bottom-of-fixture). [The drop should be a minimum of 12” for good lighting quality—and larger drops (up to 24”) can give even better light quality.]
  • Mounting method
  • Shape of the mounting plate: square or round
  • Lamp type: Halogen- or- Krypton?
  • If with Halogen Lamps: 50 or 75 watts (each lamp)
  • If with Krypton Lamps: 20, 40 or 60 watts (each lamp)