Description
Rectangular -or- Square, Up-Light chandelier
- Custom angles are available (to make a diamond, parallelogram, or trapezoid shape)
- Minilux SQ—approximately “SQuare” extrusion shape
- Sides can be any length
- No transformer or driver necessary
- Dimmable
Finishes
- White
- Black
- Brushed Chrome
- Polished Chrome
- Brushed Nickel
- Polished Nickel
- Bronze Powder Coat "Flat"
- Brushed Golden Brass
- Polished Golden Brass
Sizes
Length & Width: Sides of the rectangle or square can be of almost any length—please specify in units-of-an-inch (minimum length of a side is 17”)
Note: lengths over 12 feet will require a discrete seam
Drop (the distance FROM face-of-ceiling TO bottom-of-fixture):
- Standard Drops: are approximately 12” or- approximately 18”
- Custom Drops: are available with an up-charge
- Minimum and Maximum Drops: If a drop is too short, one will see “hot spots” on the ceiling—and 11” is the approximate minimum drop to avoid that. BUT: if the drop is too large, the distance might cause an insufficient amount of light to bounce off the ceiling. When an average good drop is wanted, then approximately 18” seems to be best, and that can be extended to about 24” (Though designers sometimes specify drops which are larger than that.)
- Adjustable Drops: Some mounting methods allow for field adjustment of the size of the drop, like the methods where the fixture is held-up by Cables (which can be field-trimmed), or when we provide Custom Drops (whose components allow for field-trimming).
NOTE: All dimensions are approximate.
Light Sources
LED boards (Close to zero UV)
14 Watts 1400 Lumens (per foot)
Color Temperature: 2700K -or- 3000K 90+ CRI
120 Volts Dimmable ETL Approved
These LED’s operate on line voltage, and NO separate driver or transformer is needed!
LED lamps (Close to zero UV)
5 Watts 60 Watt incandescent equivalent 700 lumens (each lamp)
6 Watts 75 Watt incandescent equivalent 900 lumens (each lamp)
Color Temperature: 2700K -or- 3000K 80+ CRI
Base: Bayonet, double-contact base, BA15d
120 Volts - Dimmable ETL Approved
Note: Lamps are usually spaced approximately 12” apart
These LED’s operate on line voltage, and NO separate driver or transformer is needed!
JD Krypton lamps (Blocks UV)
20, 40, or 60 Watts (each lamp)
Base: Bayonet, double-contact base, BA15d
120 Volts
Note: Lamps are usually spaced approximately 12” apart
JD Halogen lamps
50 or 75 Watts (each lamp)
Base: Bayonet, double-contact base, BA15d
130 Volts
Note: Lamps are usually spaced approximately 12” apart
NOTE: Fixtures are provided with a set of lamps (or, if specified or integral to the fixture’s design, with LED’s), as specified by the customer. It is the customer’s responsibility to verify that their selection is compatible with their wiring, power, switching, and dimming system.
Mounting Methods
- MM01A (suspended by stems, and hardwired through a stem—with screws visible)
- MM01B (suspended by stems, and hardwired through a stem—with No screws visible) – the most typically specified mounting
- MM08A (suspended by slender cables, and hardwired through a power cable)
- MM08B (suspended by slender cables, and hardwired through a stem)
- MM08C (suspended by stems, and hardwired through a power cable)
NOTE: Fixtures will be provided for installation with normal mounting conditions. It is the customer’s responsibility to verify that they have selected a fixture and mounting method which complies with local codes (L.A.H.J.) and that they are installing the fixture in an approved manner.
Specify to Order
TO ORDER— PLEASE SPECIFY EACH OF THE FOLLOWING:
We’ll be happy to help you with these specifications!
- Finish
- Length of each Side (specified in units of an inch) Note: lengths over 12 feet will require a discrete seam
- If not a rectangle or square: angles at each corner (please provide a sketch)
- Drop (the approximate distance FROM face-of-ceiling-or-soffit TO bottom-of-fixture). A frequently used drop is approximately 18” [The drop should be a minimum of 12” for good lighting quality—and larger drops (up to 24”) can give even better light quality.]
- Mounting method
- Shape of the mounting plate: square, round, or rectangular
- If with LED’s: color temperature (approx. 2700K -or- approx. 3000K)
- If with Incandescent Lamps: Halogen or Krypton?
- If with Halogen Lamps: 50 or 75 watts (each lamp)
- If with Krypton Lamps: 20, 40 or 60 watts (each lamp)